Shop Safety and Efficiency

Safety is a high priority of professional fleet managers. Fleets are known to spec their operating equipment to be the safest possible for the work they will be doing, and they train their operators to always work with safety in mind. In addition to safety, efficiency also is an important aspect of operations in well-run maintenance shops.

“Since labor accounts for about 60 percent of a fleet’s vehicle service and repair budget, it makes sense that anything a fleet can do to maximize technician efficiency will result in a bottom-line savings,” said Doug Spiller, heavy-duty product manager for Rotary Lift (www.rotarylift.com). “The biggest factors affecting technician productivity are access to vehicle components and room to work efficiently. Vehicle lifts provide more convenient, comfortable access to every serviceable part on a truck, enabling technicians to perform more work in less time. In fact, productivity studies conducted by fleets have found that installing a single vehicle lift in the shop can reduce labor overhead by $100,000 or more.”

According to Ken Atha, OSHA’s regional administrator in the West, “Workers in the automotive industry are exposed to crushing hazards from automotive lifts when servicing vehicles. These risks can be limited by properly maintaining automotive lifts and providing workers with effective training regarding inspection and use of lifts.”

“Safety starts at the top,” said R.W. “Bob” O’Gorman, president of the Automotive Lift Institute (ALI). “It begins with buying the right lift. Responsible managers know to only buy lifts that wear the gold label demonstrating that they have been third-party tested and certified to meet the ANSI safety and performance standard for lifts, ANSI/ALI ALCTV-2011.”

Lift Training and Inspection
After purchasing a lift, O’Gorman continued, “Next is training. It is very important that all technicians receive training on the proper use and maintenance of the lifts installed in the shop.”

Recognizing the need for such training, the National Conference of State Fleet Administrators recently asked Steve Perlstein, president of Mohawk Lifts, to prepare and present a webinar on vehicle lift safety. In his presentation, Perlstein pointed out that OSHA requires vehicle lifts to undergo annual inspections completed by experienced lift inspectors and that anyone using such equipment must receive training on an annual basis.

“Proper vehicle lift certification, installation and inspection have come under increased scrutiny in recent years by OSHA and other local, state, provincial, and federal health and safety officers,” O’Gorman said. “This has resulted in an increase in shops looking for qualified automotive lift inspectors.” Certified inspectors can be contacted through the ALI website (www.autolift.org).

All reputable lift manufacturers provide training on the proper use of their products when new equipment is installed in a fleet’s shop, and training also is available on their websites. Mohawk Lifts’ website (www.mohawklifts.com), for example, has several videos that include safety information about their lifts as well as information about other safety-related items available through the company.

With regard to management responsibilities relative to OSHA regulations, be aware that you won’t get a free pass because you don’t know about the regulations. Management has the responsibility to know the regulations and to follow them. As Perlstein noted in his webinar, there are two important standards fleet managers need to understand. The first is that lifts must be inspected annually by a qualified automotive lift inspector. The second is that the technicians who work on the lifts must be trained each year on how to safely and properly use them. Such training time must be documented by the fleet.

Research Product Specifications
While a vehicle lift offers a great opportunity to increase shop efficiency, it also opens up the fleet to liability for any injuries incurred by employees if the installed lift does not meet performance or manufacturing standards for the application.

According to ALI, purchasers of lifts often are confused by claims made by sellers. Such claims are sometimes made in good faith by inexperienced salespeople, but other times they may be made intentionally to confuse a potential purchaser and obtain an order for equipment that may not actually meet the purchaser’s requirements. Every lift in your shops should have an ALI/ETI certification label affixed to it, which will offer the assurance that the lift in question meets the current national safety standards.

Certification indicates that a third-party organization has determined that a manufacturer has the ability to produce a product that complies with a specific set of standards. Certified products undergo periodic re-evaluation and are required to be produced within the requirements of a documented quality program. The program is audited quarterly, regardless of the production facility’s location, to ensure continued compliance with the applicable standards.

“All lifts are not created equal,” Spiller said. “The best all-around lift for heavy-duty vehicle maintenance remains the modular in-ground lift. In-ground lifts have been the top choice of heavy-duty maintenance operations for more than 80 years because they provide the best access to maintenance items on a vehicle in the most ergonomic, space-efficient way.”

A lower price doesn’t necessarily mean that you’re getting a lift for less. Too often it means you’re getting less lift. You want a lift that delivers the lowest total cost of ownership. The most expensive lift you can buy is one that is out of service.

About the Author: Tom Gelinas is a U.S. Army veteran who spent nearly a decade as a physicist before joining Irving-Cloud Publishing Co. While at Irving-Cloud, he worked in various editorial capacities for several trade publications including Fleet Equipment, Heavy Duty Equipment Maintenance and Transport Technology Today. Gelinas is a founding member of Truck Writers of North America, a professional association, and a contributing writer for Utility Fleet Professional.